維護鑄銅雕塑4大技巧

鑄銅雕塑就是拿銅鑄造而成的各式各樣的雕塑作品，在我們的生活中還是很常見的，那么在經過風吹日曬之后為何這些雕塑還是那么的光鮮亮麗呢？其實維護雕塑有四大技巧，下面城市雕塑廠家就帶大家去了解一下！

Cast copper sculptures are all kinds of sculptures made of copper, which are still very common in our life. Then why are these sculptures so bright after the wind and sun? In fact, there are four skills to maintain sculpture. The following urban sculpture manufacturers will take you to understand!

1.周圍環境：保持鑄銅雕塑最重要的第一步是環境。有必要保持干燥的環境，沒有灰塵和空氣污染物！溫室的溫度優選控制在18℃-24℃，濕度為40％。-50％。

1. Surrounding environment: the most important first step to maintain the cast copper sculpture is the environment. It is necessary to keep a dry environment free of dust and air pollutants! The temperature of the greenhouse is preferably controlled at 18 ℃ - 24 ℃ and the humidity is 40%- 50％。

2.防護：清潔或維護鑄銅雕塑時，必須特別注意防止外界的一些有害化學物質，如酸，氯化物等。此外，移動鑄銅雕塑時，最好采取隔離措施。不要直接用雙手觸摸。

2. Protection: when cleaning or maintaining cast copper sculptures, special attention must be paid to prevent some harmful chemicals outside, such as acid, chloride, etc. In addition, when moving the cast copper sculpture, it is best to take isolation measures. Don't touch it directly with both hands.

3.鑄銅雕塑的清潔：清洗鑄銅雕塑時要小心。一定要用干凈柔軟的布擦去灰塵。最好是用刷子或吸塵器，在不容易在雕刻槽中擦布的地方吹走灰塵。

3. Cleaning of cast copper sculptures: be careful when cleaning cast copper sculptures. Be sure to wipe off the dust with a clean and soft cloth. It is best to use a brush or vacuum cleaner to blow away the dust where it is not easy to wipe the cloth in the carving groove.

4.拋光：因長時間擺放出現鑄銅雕塑出現暗淡的情況，清潔時不能用布大力摩擦。使用棉細布輕輕擦拭鑄銅雕塑的表面，達到拋光的效果，也可以保護鑄銅雕塑的表面的蠟層。

4. Polishing: cast copper sculptures appear dim due to long-term placement, so it is not allowed to rub vigorously with cloth during cleaning. Use a cotton cloth to gently wipe the surface of the cast copper sculpture to achieve the polishing effect and protect the wax layer on the surface of the cast copper sculpture.